MARKING:
Abrasives | Grit | Grade | Resinoid Bond | Reinforced with fibre glass | ||||
coarse | medium | fine | medium | medium hard | hard | |||
A | 20 | 30 | 70 | M | P | S | B | F |
CUTTING ON STATIONARY MACHINES
Dia×Thic | Arbor | Max.R.P.M | Description | Pcs/Pkg | |||||||||||
22.23 | 25.40 | 30.00 | 31.75* | 38.10* | 3800 m/min | 4300 m/min | 4800 m/min | A30R | A30Q | C36S | BF1 | BF2 | |||
250×3.2 | ● | ● |
|
|
| 4800 | 5400 | 6100 | ● |
| ● | ● |
| 25 | |
250×4.0 | ● | ● |
|
|
| 4800 | 5400 | 6100 | ● |
| ● |
| ● | 25 | |
300×3.2 |
| ● | ● | ● |
| 4000 | 4500 | 5100 | ● | ● | ● | ● |
| 25 | |
300×4.0 |
| ● | ● | ● |
| 4000 | 4500 | 5100 | ● | ● | ● |
| ● | 25 | |
350×3.2 |
| ● | ● | ● |
| 3400 | 3800 | 4400 | ● | ● | ● | ● |
| 25 | |
350×4.0 |
| ● | ● | ● |
| 3400 | 3800 | 4400 | ● | ● | ● |
| ● | 25 | |
400×3.2 |
| ● | ● | ● |
| 3000 | 3400 | 3800 | ● | ● | ● | ● |
| 25 | |
400×4.0 |
| ● | ● | ● |
| 3000 | 3400 | 3800 | ● | ● | ● |
| ● | 25 | |
450×3.2 |
| ● | ● | ● |
| 2700 | 3000 | 3400 | ● | ● | ● | ● |
| 25 | |
450×4.0 |
| ● | ● | ● |
| 2700 | 3000 | 3400 | ● | ● | ● |
| ● | 25 | |
500×5.0 |
| ● | ● | ● |
| 2400 | 2700 | 3100 | ● | ● | ● | ● |
| 25 | |
600×6.0 |
|
| ● | ● | ● | 2000 | 2200 | 2600 | ● | ● | ● |
| ● | 25 |
(*) Also standard hole 32mm and 40mm on request
RECOMMENDED GRADES
A30R
General purpose application on mild and low hardness steel, cast-iron profiles, pipes, metal sheets. Good cutting speed and long life.
A30Q
High alloy and stainless steel, hard cast-iron, special alloys, fast cutting speed and long life.
C36S
Ceramic tiles, semi hard stones, concrete, masonry, refractory, plastic, cast-iron. Good cutting speed and long life.
CUTTING ON PORTABLE MACHINES WITH FLAT CUT-OFF WHEELS
Dia×Thic×Arbor
| Max.R.P.M | Description | Pcs/Pkg | ||||||||
3800 | 4300 | 4800 | A30S | A36S | A36N | A30N | C30S | BF1 | BF2 |
| |
100×2.5×16 | 12000 | 13800 | 15300 | ● |
|
|
| ● | ● |
| 25 |
115×2.0×22 | 10500 | 11600 | 13300 |
| ● |
|
|
|
| ● | 25 |
115×2.5×22 | 10500 | 11600 | 13300 | ● |
|
| ● | ● | ● |
| 25 |
125×2.0×22 | 9600 | 10700 | 12200 |
| ● |
|
|
|
| ● | 25 |
125×2.5×22 | 9600 | 10700 | 12200 | ● |
|
| ● | ● | ● |
| 25 |
150×2.0×22 | 8000 | 8900 | 10200 |
| ● |
|
|
|
| ● | 25 |
150×2.5×22 | 8000 | 8900 | 10200 | ● |
|
|
| ● | ● |
| 25 |
180×2.0×22 | 6700 | 7400 | 8500 |
| ● |
|
|
|
| ● | 25 |
180×2.5×22 | 6700 | 7400 | 8500 | ● |
| ● | ● | ● | ● |
| 25 |
230×2.0×22 | 5200 | 5800 | 6600 |
| ● |
|
|
|
| ● | 25 |
230×2.5×22 | 5200 | 5800 | 6600 | ● |
| ● | ● | ● | ● |
| 25 |
300×3.5×22(▲) | 4000 | 4500 | 5100 | ● |
|
| ● | ● |
| ● | 25 |
350×4.0×22(▲) | 3400 | 3800 | 4400 | ● |
|
| ● | ● |
| ● | 25 |
(▲)Also standard hole 20mm and 25.4mm –Speed 100m/sec.
RECOMMENDED GRADES
A30S
Mild steel, low alloy steel, metal sheets, pipes, profiles, general purpose, good cutting speed and long life.
A36S
Thin cut-off wheels for general purpose on mild, low and medium alloy steel, small sections, metal sheets, profiles, boxes. Fast and cool cutting, good side finish.
A36N
High alloy and stainless steel. Low iron and sulphur content. Recommended for rust-free application, fast and cool cut, long life.
A30N
Aluminum and non ferrous metals. Fast cutting and free from loading discs.
C30S
General purpose application on masonry, concrete and other building materials, refractory, marbles and stone, etc.
SPECIAL CUT-OFF WHEELS FOR LOW POWER CHOP SAWS
Dia×Thic×Arbor | Max.R.P.M | Description | Pcs/Pkg | |||||
3800 m/min | 4300 m/min | 4800 m/min | A36N | A46S | BF1 | BF2 |
| |
250×2.4×25.4 | 4800 | 5400 | 6100 |
| ● |
| ● | 25 |
250×2.8×25.4 | 4800 | 5400 | 6100 | ● |
| ● |
| 25 |
300×2.4×25.4 | 4000 | 4500 | 5100 |
| ● |
| ● | 25 |
300×2.8×25.4 | 4000 | 4500 | 5100 | ● |
| ● |
| 25 |
350×2.4×25.4 | 3400 | 3800 | 4400 |
| ● |
| ● | 25 |
350×2.8×25.4 | 3400 | 3800 | 4400 | ● |
| ● |
| 25 |
RECOMMENDED GRADES
A36N general purpose
A46S general purpose
CUTTING ON SMALL PNEUMATIC & ELECTRICAL TOOLS
Dia×Thic×Arbor
| Max.R.P.M | Description | Pcs/Pkg | |||||
3800 | 4300 | 4800 | A46T | A36S | BF1 | BF2 | ||
50×1.6×10 | 24800 | 27600 | 31500 | ● |
|
| ● | 100 |
65×2.0×10 | 19200 | 21400 | 24400 | ● |
|
| ● | 100 |
76×2.0×10 | 16000 | 17800 | 20300 |
| ● |
| ● | 100 |
80×2.0×10 | 15100 | 16800 | 19200 |
| ● |
| ● | 100 |
100×2.0×10 | 12000 | 13400 | 15300 |
| ● | ● | ● | 100 |
RECOMMENDED GRADES
A46T general purpose
A36S general purpose
CUTTING ON PORTABLE MACHINES WITH DEPRESSED CENTER WHEELS
Dia×Thic×Arbor | Max.R.P.M | Description | Pcs/Pkg | ||||||||
3800 | 4300 | 4800 | A30S | A36S | A36N | A30N | C30S | BF1 | BF2 | ||
76×2.5×10 | 16000 | 17800 | 20400 |
| ● |
|
| ● |
| ● | 50 |
100×2.5×16 | 12000 | 13400 | 15300 |
| ● |
|
| ● | ● |
| 50 |
100×3.2×16 | 12000 | 13400 | 15300 | ● |
|
|
| ● |
| ● | 50 |
115×2.5×22 | 10500 | 11600 | 13300 |
| ● |
|
| ● | ● |
| 50 |
115×3.2×22 | 10500 | 11600 | 13300 | ● |
| ● | ● | ● |
| ● | 50 |
125×2.5×22 | 9600 | 10700 | 12200 |
| ● |
|
| ● | ● |
| 50 |
125×3.2×22 | 9600 | 10700 | 12200 | ● |
| ● | ● | ● |
| ● | 50 |
150×3.2×22 | 8000 | 8900 | 10200 | ● |
|
|
| ● | ● |
| 50 |
180×2.2×22 | 6700 | 7400 | 8500 |
| ● |
|
| ● |
| ● | 25 |
180×3.2×22 | 6700 | 7400 | 8500 | ● |
| ● | ● | ● | ● |
| 25 |
230×2.5×22 | 5200 | 5800 | 6600 |
| ● |
|
| ● |
| ● | 25 |
230×3.2×22 | 5200 | 5800 | 6600 | ● |
| ● | ● | ● | ● |
| 25 |
Recommended grades
A30S
Mild steel, low alloy steel, metal sheets, pipes, profiles, general purpose, good cutting speed and long life.
A36S
Thin cut-off wheel for general purpose on mild, low and medium alloy steel, small sections, metal sheets, profiles, boxes. Fast and cool cutting, good side finish.
A36N
High alloy and stainless steel. low iron and surphur content. Recommended for rust-free application. Fast and cool cutting, long life.
A30N
Aluminum and non ferrous metals. Fast cutting and free from loading discs.
C30S
General purpose application on masonry, concrete and other building materials, refractory, marble and stone. etc.
SNAGGING ON PORTABLE MACHINES
Dia×Thic×Arbor | Max.R.P.M | Description | Pcs/Pkg | |||||||||||||
3800 | 4300 | 4800 | A24N | A24R | A24S | A30P | A30N | ZA24R | C24R | BF1 | BF2 | BF3 | BF4 |
| ||
76×4×10 | 16000 | 17800 | 20140 |
| ● |
|
|
|
| ● | ● |
|
|
| 100 | |
76×6×10 | 16000 | 17800 | 20140 |
| ● |
|
|
|
| ● |
| ● |
|
| 50 | |
100×4×16 | 12000 | 13400 | 15300 |
| ● |
|
|
|
| ● | ● |
|
|
| 50 | |
100×6×16 | 12000 | 13400 | 15300 |
| ● |
|
|
|
| ● |
| ● |
|
| 50 | |
115×4×22.2 | 10500 | 11600 | 13300 |
| ● |
|
|
|
| ● | ● |
|
|
| 50 | |
115×6×22.2 | 10500 | 11600 | 13300 |
| ● |
| ● |
|
| ● |
| ● |
|
| 50 | |
125×4×22.2 | 9600 | 10700 | 12200 |
| ● |
|
|
|
|
| ● |
|
|
| 50 | |
125×6×22.2 | 9600 | 10700 | 12200 |
| ● |
| ● |
|
| ● |
| ● |
|
| 50 | |
150×6×22.2 | 8000 | 8900 | 10200 |
| ● |
|
|
|
| ● |
| ● |
|
| 50 | |
180×6×22.2 | 6700 | 7400 | 8500 | ● | ● | ● | ● | ● | ● | ● |
| ● |
|
| 25 | |
180×8×22.2 | 6700 | 7400 | 8500 |
| ● |
|
|
| ● | ● |
|
| ● |
| 25 | |
230×6×22.2 | 5200 | 5800 | 6600 | ● | ● | ● | ● | ● | ● | ● |
| ● |
|
| 25 | |
230×8×22.2 | 5200 | 5800 | 6600 |
| ● |
|
|
| ● | ● |
|
| ● |
| 25 | |
230×10×22.2 | 5200 | 5800 | 6600 |
| ● |
|
|
| ● | ● |
|
|
| ● | 25 |