Double Press Belt Squaring and Chamfering
Dual press beam structure and imported synchronous toothed transmission belt prevent tile skewing and displacement during the grinding process. With a 250mm squaring wheel, heavy grinding head design, the squaring effect is very good and less electricity is consumed. The updated design and high quality head assembly provide a smooth and fine grinding effect.
Technical Parameters
Model | BS650/20+4/24+4 | BS1000/20+4/24+4 | BS1200/20+4/ 24+4/28+4/32+4 | BS1800/20+4/ |
Squaring heads(pcs) | 20/24/28/32/36 | 20/24/28/32/36 | 20/24/28/32 | 20/24/28 |
Chamfering heads(pcs) | 4 | 4 | 4 | 4 |
Working width(mm) | 300~650 | 400~1000 | 500~1200 | 600~1800 |
Working thickness(mm) | 8.5~20 | 8.5~20 | 8.5~20 | 8.5~20 |
Squaring head motor power(KM) | 3-5.5 | 3-5.5 | 3-5.5 | 3-5.5 |
Pneumatic head motor power | 1.5 | |||
Fixing head motor power | 2.2 | |||
Pushing motor power | 0.55-1.5 | |||
Single Press Belt Squaring and Chamfering
Single-belt compression, drum-type single compression beam structure, imported lacework drive belt, compact structure, and low cost. This machine is highly suited to processing floor and wall tile up to 650mm.
The drum-type head assembly allows more grinding quantity and higher daily capacity.
Alignment mechanism and auto floater mechanism control the diagonal and size error of tiles within stipulated range.
Technical Parameters
Model | 3I650/12 | BJ650/12+4 | 3J650/16 |
Working width(mm) | 500~650 | 500~650 | 500~650 |
Working thickness(mm) | 8.5~12 | 8.5~12 | 8.5~12 |
Working speed(m/min) | 10~30 | 10~30 | 10~30 |
Squaring heads(pcs) | 12 | 12 | 10 |
Chamfering heads(pcs) | 0 | 4 | 0 |
Squaring head motor power(KM) | 5.5 | 5.5 | 5.5 |
Main drive motor power(Km) | 0 | 1.5 | 0 |
Total installed motor power(Km) | 2X0 | 2X0 | 2X0 |
water consumption(L/min) | 320 | 400 | 10400 |