We manufactures glassfibre reinforcements impregnated with phenolic resins for the abrasive industry:
Disks / rolls for grinding and cut-off wheels
Weights: From 65gr/sqm to 580gr/sqm
Constructions: Plain,Leno
Dimensions:
Disks: From 28mm to 1500mm.
Rolls: 14800 mm (width Max) and different lengths.
Complements: BP30 (Black Paper 30 gr/sqm); BP35 (Black Paper 35 gr/sqm); BP50 (Black Paper 50 gr/sqm)
Separators: WPS (waxed paper separator) and PS (polyethylene separator)
Backing Pads for Flap Disks
Type: Flat and Convex
Rings: 1 or 2
Customised Composition (different layers on different fabrics)
STORAGE
Fibreglass fabric impregnated with phenolic resin should not be subjected to situations of extreme temperatures and humidity. It is recommended, if possible, to store the material in controlled conditions at 15ºC (59ºF) and 60% of humidity.
In addition, it is also recommended to store unused material in its original packaging in order to preserve the disks’ physical properties.
Under these conditions, the material has a maximum guaranteed life of three months.